Posted on Leave a comment

3D CGI anime “OBSOLETE” — “Exoframe” (Under Licensor Review)!

3D CGI anime “OBSOLETE” — “Exoframe” (Under Licensor Review)!

2019/09/27

The 3D CGI anime “OBSOLETE” (https://project-obsolete.com/en/) will begin streaming at YouTube Originals on December 2019, and 1/12th scale articulated figures of the “Exoframe” robot featured in the anime are currently being developed by threezero! The prototype is still under licensor review, and is on display now at ALL JAPAN MODEL & HOBBY SHOW 2019 (https://hobbyshow.co.jp/en/)!

Posted on

Notice about 3A brand

Notice about 3A brand:

Moving forward, all 3A branded licenses like Transformers and Destiny 2 will be produced and distributed by Threezero and carry the Threezero brand. Future pre-orders will be placed through https://www.threezerohk.com

All pre-orders made through https://www.bambaland.com and https://www.WO3A.com will be honored by Threezero.

Beginning from August 1st, 2019 3A will close its online store for pre-orders. Please refer to https://www.threezerohk.com/shipping-schedule/ for the latest shipping schedule.

Please direct any questions about your orders to 3zerocs@three-zero.com

Thank you for following 3A for over 10 years!

Items listed below will be shipped in August 2019:
・3AGO Bomb V2 Square set – early Aug
・3AGO Clear Square R1 set – early Aug
・LAST STAND YAMA ULTRA TK – ONLINE EDITION – early Aug
・SMIRKING MASTER ONE JODAN ULTRA TK – early Aug
・Bot Club | Desert Stroll Bot – end of Aug
・8” ASHTRO LAD – WAVE2 | MOON WATCH – end of Aug
・8” ASHTRO LAD – WAVE2 | LOCAL GUARDIAN – end of Aug

Posted on

ACGHK2019 3A / THREEZERO Limited Edition Pre-order NEMESIS PRIME DLX SCALE COLLECTIBLE FIGURE (LIMITED EDITION) BY 3A/THREEZERO

ACGHK2019 3A / THREEZERO Limited Edition Pre-order NEMESIS PRIME DLX SCALE COLLECTIBLE FIGURE (LIMITED EDITION) BY 3A/THREEZERO
No. This is not the heroic Autobot leader, Optimus Prime. He just has one of those faces.

Joining the lineup of the 3A/Threezero DLX Scale Collectible Figure Series comes a Limited Edition figure of the nefarious Nemesis Prime. Don’t let this evil doppelganger slip through your fingers, limited quantities available exclusively through ACGHK.

DLX Nemesis Prime figure does not convert, BUT it does stand at 11.2 inches tall and feature incredible sculpted detailing, 53 points of articulation, LED illuminated eyes, and die-cast metal parts.

3A/Threezero DLX Scale Collectible Figure Series

The DLX line focuses on precise design work at a smaller scale with high articulation and high detail. Each DLX figure utilizes a unique metal-frame which not only enhances the range of articulation, it greatly increases its weight and durability to provide an incredible in-hand feel. Together with Threezero’s detailed paint applications, attention to detail, and high-quality production each DLX figure is a work of art.

Materials:
ABS, PVC, POM, ZINC ALLOY

FEATURES:
• Limited Edition of 1000 Worldwide
• Officially Licensed by Hasbro
• Approximately 11.2 inches Tall (28.45cm)
• 53 Points of Articulation
• Die-cast Metal Parts
• LED Illuminated Eyes*
INCLUDES:
• One (1) Ion Blaster
• Four (4) Pairs of Interchangeable Hands: Fists & Relaxed & Spread & Weapon Holding
• One (1) Left Command Hand
• One (1) Action Stand with Base
*Requires AG13 x 2 Batteries (Batteries Not Included)
**Design and color may change on final production version
© 2019 Hasbro. Licensed by Hasbro.
NOTE: Figure does not convert.
SRP: HKD1490
2020 first quarter shipped
Booking details: Limited quantity: 150
It will be booked in 3 days, with a daily quota of 50.
July 26 (ACGHK 2019 first day): 50 places to accept reservations at the ‘SEVEN’ booth (F04-06, F09-11), first come first served.
July 27 – 28: 50 places per day. The participants who made the reservation to the venue on the same day will be drawn by online lottery.
Anyone interested in the event should register at the following address start from July 22, 2019, 12:00 noon to July 23, 1:00 pm (Hong Kong time).

bit.ly/2Y0aa5D

The result of the draw will be notified by email to the participants who were drawn on July 24.
note:
– Repeat registration, only one counted.
– The ID number must be entered and the relevant identification document should be shown at the time of booking to verify identity
– One per guest per reservation
– If you fail to order at the venue on the specified date, your eligibility will be cancelled.

Posted on

NEMESIS PRIME DLX SCALE COLLECTIBLE FIGURE (LIMITED EDITION)

NEMESIS PRIME DLX SCALE COLLECTIBLE FIGURE (LIMITED EDITION) BY 3A/THREEZERO
No. This is not the heroic Autobot leader, Optimus Prime. He just has one of those faces.
Joining the lineup of the 3A/Threezero DLX Scale Collectible Figure Series comes a Limited Edition figure of the nefarious Nemesis Prime. Don’t let this evil doppelganger slip through your fingers, limited quantities available exclusively through https://hasbropulse.com/
DLX Nemesis Prime figure does not convert, BUT it does stand at 11.2 inches tall and feature incredible sculpted detailing, 53 points of articulation, LED illuminated eyes, and die-cast metal parts.

3A/Threezero DLX Scale Collectible Figure Series
The DLX line focuses on precise design work at a smaller scale with high articulation and high detail. Each DLX figure utilizes a unique metal-frame which not only enhances the range of articulation, it greatly increases its weight and durability to provide an incredible in-hand feel. Together with Threezero’s detailed paint applications, attention to detail, and high-quality production each DLX figure is a work of art.

Materials:
ABS, PVC, POM, ZINC ALLOY

FEATURES:
• Limited Edition of 1000 Worldwide
• Officially Licensed by Hasbro
• Approximately 11.2 inches Tall (28.45cm)
• 53 Points of Articulation
• Die-cast Metal Parts
• LED Illuminated Eyes*

INCLUDES:
• One (1) Ion Blaster
• Four (4) Pairs of Interchangeable Hands: Fists & Relaxed & Spread & Weapon Holding
• One (1) Left Command Hand
• One (1) Action Stand with Base


*Requires AG13 x 2 Batteries (Batteries Not Included)
**Design and color may change on final production version
NOTE: Figure does not convert.
@hasbropulse © 2019 Hasbro. Licensed by Hasbro.

Posted on

Episode #1 of the “DRAGON CIRCUS” manga has launched today

Episode #1 of the “DRAGON CIRCUS” manga has launched today! The rest of the pages of episode #1 can be read online at the manga website “Flat HERO’S” (https://viewer.heros-web.com/episode/10834108156668093809) ! Please note that the manga is currently provided in Japanese language only, and the pages are read from right to left.

“DRAGON CIRCUS” is a new serial manga by Eiichi Shimizu and Tomohiro Shimoguchi, who works on the “ULTRAMAN” manga at the Monthly HERO’S magazine, and this will be the first all-original manga they have created since “Linebarrels of Iron”. The details on the “DRAGON CIRCUS” figures which threezero is currently developing will be announced later!

Posted on

From the anime “One-Punch Man”, SEASON 2 version Saitama’s 1/6th scale articulated figure is coming!

From the anime “One-Punch Man”, SEASON 2 version Saitama’s 1/6th scale articulated figure is coming! The “1/6 Articulated Figure: Saitama (SEASON 2)” comes in 2 versions; a standard version and a deluxe version. The standard version comes with a hero suit with weathering effects applied. The deluxe version comes with everything from the standard version, plus a judo suit and wig where Saitama used at the martial arts tournament “Super Fight”, and also an exchangeable head with a comical expression. Both versions come with exchangeable hand parts. Priced at USD119 for the standard version, and USD139 for the deluxe version.

Its samples will be on display at San Diego Comic Con (#2401 at Diamond Comic Distributors booth) taking place from July 18th in US, and also at Wonder Festival (Hall 1 at Good Smile Company booth) taking place in Japan on July 28th!

  • Under licencor checking. Final product may vary from prototype images.